Waterstop rx 102. .

Waterstop rx 102. 1). WATERSTOP-RX® is an expanding strip waterstop designed to stop water ingress through cast-in-place concrete construction joints. Waterstop-RX is designed for both continuous and intermittent hydrostatic conditions and has been successfully tested to resist 231 feet (70 m) of hydrostatic pressure. Waterstop-RX is an active waterstop that functionally replaces conventional passive PVC dumbbell waterstops. This self-sealing, non-swelling preformed joint sealant provides a lasting, watertight bond on both fresh and cured concrete surfaces. Designed for greater performance predictability, it replaces traditional PVC/Rubber dumbbell waterstops, eliminating the need for special pieces, split-forming, and seams. Install WATERSTOP-RX directly to soldier piles when wood lagging is po-sitioned outside the piles toward the retained earth or when the wood agging is positioned adjacent to the pile’s outer flange (see Figure 6. Upon contact with water, it expands to form a positive seal against the concrete. WATERSTOP-RX 102 is produced in a half-circle (Crescent) shape measuring 19 x 9 mm (3/4” x 3/8”). WATERSTOP-RX® 102 is produced in a half-circle (Crescent) shape measuring 19 x 9 mm (3/4” x 3/8”). Waterstop-RX is designed for both continuous and intermittent hydrostatic conditions and has been successfully tested to resist 231 ft (70 m) of hydrostatic pressure. . ziq axqo bqbuklmb hfmopn wdumv kgjxcps aua nyaea jqkw nsrf